PRODUCT OVERVIEW
Naxa NHS-5002 Quick Start Guide
1
1. Connect the AC/DC adapter to the unit and wall outler. “Wait”
will appear on the display.
2. Press and hold the STANDBY/MODE button on the unit, or
press the Power Button on the remote control, to turn the unit on.
Press the STANDBY/MODE button on the unit, or repeatedly
press the MODE Button on the remote control, to turn to the
desired mode. The modes are as follows:
WIFI.............................WIFI Mode
BT.................................Bluetooth Mode
RADIO..........................FM Radio Mode
AUX 1...........................AUX IN 1 Mode
AUX 2...........................AUX IN 2 Mode
OPT..............................OPTICAL IN Mode
NOTE: Amazon Alexa will only operate while the device is in
WIFI Mode. External streaming through the device can be
done via the Amazon Alexa app while in WIFI Mode.
3. During Playback:
- Press and hold the VOL- or VOL+ button on the unit, or press
the VOL- or VOL+ button on the remote, to adjust the volume.
- Press the Mute button on the remote to turn the audio off. Press
again to resume audio.
4. When finished listening, press and hold the STANDBY/MODE
button on the unit, or press the power button on the remote
control, to put the unit into standby mode.
GENERAL OPERATION
SYMPTOM
POSSIBLE CAUSE
POSSIBLE SOLUTION
No sound or
sound weak
Volume level of paired/connected device
is in low level
Raise the volume level of the
paired/connected device
Sound
distortion
Volume level of the connected/paired
device is to high
Reduce the volume level of the
connected/paired device
BT not
functioning
The external BT device had NOT paired to
the unit
Pair the external BT device to the
unit
The external BT device is to far from the
unit
Place the external BT device
closer to the unit
TROUBLESHOOTING
What’s in the Box:
1. Main unit with antenna
2. Power adapter
3. Remote control
4. 3.5mm auxiliary cable (for AUX 1 use)
5. Red and white RCA cable (for AUX 2 use)
NOTE: Optical connection cable not provided.
