WIFI SETUP
NOTE: Before connecting a device to the unit, download the Naxa
Resound app from the Google Play store or the Apple App store.
The App icon will appear as follows after installation is successful:
Connecting to WiFi:
1. Plug one end of the adapter into the DC-IN jack of the speaker,
then plug the adapter into the wall outlet. Press and hold the
STANDBY/MODE button on the unit to turn the unit on. Wait until
“WIFI” flashes on the display. The speaker is now ready to
connect.
2. Turn on the WIFI on your iOS or Android device. Connect your
iOS or Android device to the desired WiFi network.
3. Tap the NAXA RESOUND icon on your iOS or Android device. It
will automatically start to scan and search for available speakers.
Read the on-screen instructions and press “Wi-Fi Setup Wizard” to
continue.
4. Read the instructions on the screen and tap “Next” to continue.
5. Select the device labeled NHS-5002.
6. Tap “Password” to enter the Wi-Fi password and connect the
speaker to the Wi-Fi network. Tap “Next” to continue.
7. Press and hold the WPS button on top of the speaker. Tap
“Next” to continue.
8. There will be voice instructions during the connection process.
9. When the speaker is successfully connected to the Wi-Fi, the
Mode indicator on top of the speaker will stay white and “WIFI” will
remain on the display. If connection fails, please try again and
repeat the above steps.
10. Once connected, the following screen will appear. Tap
“Custom” to change to the desired location name, or tap one of the
names listed.
11. Select the desired language for Alexa.
12. Before using Amazon LinkPlay Alexa voice control function,
you must have an Amazon account. Create an account on
Amazon’s website. If you already have an account, please sign in.
After you sign in, Alexa is ready. You can ask Alexa freely as
on-screen instructions display. Press the communication button
once to activate the speaker before talking to the speaker (or you
must say “ALEXA” to activate the speaker’s communication
system without pressing any button).
Note: You must be connected to WiFi in order to operate Amazon
Alexa. Sound input to the device will be cut off while Alexa
functionality is being used.
13. Next, the DEVICE LIST will appear, as shown below:
- Tap “+” to add more speakers to the network. Repeat the proceducres
listed above to establish connection and follow the on-screen instructions.
-Tap
to rename the speaker, check the speaker info, reset to the
factory setting, or check the preset content.
- Tap “LR” to change the audio mode to L (left channel), R (right channel),
and LR (stereo).
NOTE: For iOS devices, touch and slide downward from the top of the
device’s screen to update the DEVICE LIST. If there is another device on
the same network, the device will be added to the DEVICE LIST.
14. If more than one speaker has been added to the DEVICE LIST, you
can tap the instruction “How to switch between solo and multi mode?” to
learn how to switch between solo and multi mode, as shown on the figure
below.
<
DEVICE LIST
Play All
<
DEVICE LIST
Multi Mode: Press and hold device icon and
drag towards another device to pair
devices.
...............................................
How to switch between solo and multi
mode?
Play All
3
