AMAZON LINKPLAY ALEXA VOICE CONTROL
AMAZON LINKPLAY ALEXA VOICE CONTROL
Before using Amazon LinkPlay Alexa voice control function, you
must create an Amazon account. Create an account on the
Amazon website. (www.amazon.com)
1. Touch Amazon on the home screen. A login window will
appear. Enter your account information to log in.
2. Press the button once to activate the speaker to communi-
cate before speaking to the speaker (or you must say “ALEXA” to
activate the speaker’s commincation system without pressing any
button).
Example 1:
- Press the communication button. Then ask the speaker, “What’s
the weather like today?”
The speaker will reply, “The weather is not so cold.”
Example 2:
- Initiate communication by saying “Alexa”. Then you can ask
“What’s the time now?”
The speaker will reply, “It is 8 o’clock now.”
- Continue to ask the speaker to do other things, such as “Play
music”.
The speaker will reply, “Here is the station we found.” Music will
then play.
3. If you want to stop asking or commanding the speaker, or
avoiding external voice interference, press and hold the button
to turn off voice input. The communication indicator will turn red.
Press and hold again to turn back on.
NOTE: Alexa functionality will work in Wi-Fi mode ONLY.
BLUETOOTH OPERATION
AUX IN 1 OPERATION (Good)
Pairing the speaker with Bluetooth devices (mobile phone or
music device)
1. Plug one end of the adapter to the DC-IN jack of the speaker.
Plug the adapter into the wall outlet. Press and hold the STAND-
BY/MODE button to power on the unit. Wait until “WIFI” appears
on the display.
2. Press the MODE button repeatedly until the “BT” flashes on the
display. Now the unit is in pairing mode.
3. Activate the Bluetooth function on your Bluetooth-enabled
device. Please refer to the manufacturer’s instructions of your
device.
4. Once you have activated Bluetooth on your device, select the
speaker name from the pairing list of available Bluetooth devices.
NOTE: the pairing name is “NAXA NHS-5002”.
5. After successfully pairing, “BT” will stay on the display and you
should hear a confirmation tone.
6. If pairing is unsuccessful, turn off the speaker first. Then follow
the above steps to pair again.
7. Once you have paired the speaker with a device, the speaker
will remember and automatically pair with the connected device
when the device’s Bluetooth is activated within range.
NOTE: Amazon Alexa functionality is not available in this
mode.
RADIO OPERATION
Before using your unit for FM reception, unwrap and fully extend
the antenna wire. You may need to adjust the position of the
antenna wire for maximum signal strength.
1. Plug one end of the adapter into the DC-IN jack of the speaker.
Plug the adapter into the wall outlet. Press and hold the STAND-
BY/MODE button to power on the unit. Waitu until “WIFI” appears
on the display.
2. Press the MODE button repeatedly until “RADIO” flashes on
the display.
3. Press the / WPS button on the unit to seaerch up and down
the frequency band. The radio will search for available stations
and store them automatically.
4. Press the or button to listen to the stored stations.
NOTE: Amazon Alexa functionality is not available in this
mode.
1. Connect the external audio device to the unit with an audio
connection cable with 3.5mm stereo mini jacks:
- Insert one end into the mobile phone/external audio device’s
Line Out or AUX Out jack.
- Insert the other end into the AUX-IN jack on the rear of the main
unit.
NOTE: Be sure to establish the connection properly, as
shown below:
2. Plug one end of the adapter into the DC-IN jack of the speaker.
Plug the adapter into the wall outlet. Press and hold the STAND-
BY/MODE button to power on the unit. Wait until “WIFI” appears
on the display.
3. Press the MODE button repeatedly until “AUX 1” flashes on the
display.
4. Play music from your external device.
NOTE: Amazon Alexa functionality is not available in this
mode.
4
During playback:
- Press the button to Play or Pause playback.
- Press or to skip forward or backward to a desired
track.
- Press and hold the VOL- or VOL+ button to adjust the
volume.
