Navistar ProStar+, Руководство по эксплуатации и обслуживанию, Страница: 97 / 304

Controls / Features
Automatic Intermittent Interval Control (Optional) – This
feature automatically changes the wiper speed from HIGH or
LOW to the slowest intermittent speed when the parking brake
has been set, and the wipers have been on for a predetermined
length of time. When the parking brake is released, the wipers
return to their previous speed.
WARNING
To prevent property damage, personal injury, and
/ or death, do not use the washers in freezing
weather without first warming the windshield with
the defrosters; otherwise, the washer solution
may freeze on the windshield and obscure your
vision and cause an accident.
Do not use radiator coolant or antifreeze in the
windshield washer reservoir.
Radiator coolant
in the washer reservoir can severely reduce
visibility when sprayed on the windshield.
Keep the fluid reservoir filled with Fleetrite Windshield Washer
Solvent or equivalent.
6. Lo / High Beam - When the turn signal stalk is pulled past
the “click” position, lights will switch to Hi-Beam position. When
pulled again they will revert to Lo-Beam.
Headlight Flash-To-Pass - When the turn signal lever is pulled
with the headlights OFF, the Hi-Beam lights will come on and
stay on as long as the lever is held in the pulled position. When
the Lo-Beam headlights are ON, the Hi-Beam lights can be made
to flash if the lever is not lifted past the click or dimmer position.
When the Hi-Beam headlights are ON, the Lo-Beam lights can
be made to flash if the lever is not lifted past the click or dimmer
position.
7. Washer / Wiper Control - The windshield washer, along with
the windshield wipers, is controlled by the WASHER / WIPER
knob on the turn signal switch lever. To operate the windshield
washer, push in on the wiper knob to spray solution on the
windshield. Wipers will start wiping and continue for two cycles.
85