Navistar ProStar+ Скачать руководство пользователя страница 116 | Manualshive

Страница: 116 / 304

Navistar ProStar+ Скачать руководство пользователя страница 116

Controls / Features

Meritor Wabco

®

OnGuard

™

™

™

Collision Safety

System

WARNING

To prevent property damage, personal injury,
and / or death, before using this feature, read
and thoroughly understand the Meritor Wabco

®

OnGuard

™

™

™

Collision Safety System's Driver

Instruction Manual, and obtain proper training on
the system.

WARNING

To prevent property damage, personal injury,
and / or death, the Meritor Wabco

®

OnGuard

™

™

™

Collision Safety System is intended solely as an
aid for an alert and conscientious professional
driver.

It is not to be used or relied upon to

operate a vehicle. The system should be used
in conjunction with rear view mirrors and other
instrumentation

to

maintain

safe

operation.

A vehicle equipped with the Meritor Wabco

®

OnGuard

™

™

™

Collision Safety System should be

operated in the same safe manner as if the
system were not installed. The system is not a
substitute for normal safe driving procedures. It
will not compensate for any driver impairment,
such as drugs, alcohol, or fatigue.

Meritor Wabco

®

OnGuard

™

™

™

Display

Audible and visual alerts are provided by the OnGuard

™

Display

located in the instrument panel where it is easily visible and
accessible.

The optional Meritor Wabco

®

OnGuard

™

Collision Safety System

assists the driver in maintaining a safe following distance with
active braking. The system monitors the distance, speed and
deceleration of a vehicle ahead to automatically alert the driver
and decelerate the vehicle when a preset following distance is
compromised. It sends audible and visual warnings through an
in-cab instrument panel display so the driver is alerted to take
the appropriate corrective action.

104

«
...
114
115
116
117
118
...
»

Содержание ProStar+

















































































































































































































































































































Отзывы:

Нет отзывов