Navistar ProStar+ Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 304

Navistar ProStar+ Скачать руководство пользователя страница 51

Inspection Guide

Right Side Under Vehicle

1.

Drive Shaft

2.

Exhaust System

3.

Transmission

4.

Frame

WARNING

To prevent property damage, personal injury, and
/ or death, maintain adequate clearance between
all parts of the exhaust system and all hoses,
wires and lines for engine cooling, brake system,
fuel system, power steering system and electrical
system. Heat damage to hoses, wires, or lines
may cause vehicle malfunction.

NOTE: The illustration is for reference only and may differ
from the actual vehicle.

1.

Drive Shaft: Ensure that all shaft couplings are secure.

2.

Exhaust System: Check to see that all component parts
are securely mounted and no cracks, holes, or severe
dents are visible.

Evidence of soot buildup around

clamps or connections is a clear indicator of a leak
being present. Ensure that all hoses, wires, and air
lines are secured away from exhaust components.

3.

Transmission: Inspect for leaks.

4.

Frame: Check for cracks or bends in frame. Make sure
there are no loose, cracked, bent, broken or missing
crossmembers or crossmember fasteners.

•

Air Lines and Wiring: Check air lines and electrical wiring
for proper security, damage, and chafing.

Listen for

audible air leaks.

39

«
...
49
50
51
52
53
...
»

Содержание ProStar+

















































































































































































































































































































Отзывы:

Нет отзывов