Navistar ProStar+ Скачать руководство пользователя страница 105 | Manualshive

Страница: 105 / 304

Navistar ProStar+ Скачать руководство пользователя страница 105

Controls / Features

MAX Air Conditioning Mode

In this mode, all airflow is directed to the panel air outlets and the air is recirculated inside the
vehicle. Use this mode to block out any outside odors, smoke, or dust and to cool the interior
rapidly upon initial startup in very hot or humid weather.

NOTE: Continuous use of the recirculate mode may make the inside air stuffy. Use of this
mode for longer than 15 minutes is not recommended.

The A/C compressor turns on and off automatically as needed when in this mode.

NORM Air Conditioning Mode

In this mode all airflow is directed to the panel air outlets. Fresh (outside) air is used to cool the
vehicle in this mode.

The A/C compressor turns on and off automatically as needed when in this mode.

Bi-Level Air Conditioning Mode

In this mode 75% of the airflow is directed to the panel air outlets and 25% of the airflow is directed
to the floor air outlets, and fresh (outside) air is circulated inside the vehicle.

The A/C compressor turns on and off automatically as needed when in this mode.

Vent Mode

In this mode all airflow is directed to the panel air outlets and fresh (outside) air is circulated
inside the vehicle.

Floor Mode

In this mode all airflow is directed to the floor air outlets and fresh (outside) air is circulated inside
the vehicle.

93

«
...
103
104
105
106
107
...
»

Содержание ProStar+

















































































































































































































































































































Отзывы:

Нет отзывов