Navistar ProStar+ Скачать руководство пользователя страница 115 | Manualshive

Страница: 115 / 304

Navistar ProStar+ Скачать руководство пользователя страница 115

Controls / Features

The optional Bendix

®

Wingman

®

Fusion

®

system is an advanced

safety system that integrates radar, camera and brakes into
a comprehensive driver assistance system that includes the
following features not offered with the Bendix

®

Wingman

®

Advanced

®

system.

•

Overspeed Alert and Actions –

system can read speed

limit signs and notify the driver and fleet of overspeed
travel with two levels of intervention.

•

Alert Prioritization –

only the most critical alert is

sounded to the driver to minimize distractions during
potentially severe events.

•

Enhanced Collision Mitigation –

potentially removes

up to twice as much vehicle speed as current collision
mitigation systems.

•

Stationary Vehicle Braking –

can automatically alert the

driver up to 3.5 seconds before impact and apply vehicle
brakes if the large, stationary, in-lane object is definitively
identified as a vehicle.

•

Enhanced SafetyDirect –

two-way communication

channel and Level Two overspeed video capture.

Visual and audible alerts are provided by the Driver Interface
Unit located in the instrument panel where it is easily visible and
accessible. Refer to the driver instruction manual for complete
operating instructions.

Bendix

®

Driver Interface Unit

Bendix

®

Driver Interface Unit

Visual and audible alerts are provided by the Driver Interface
Unit located in the instrument panel where it is easily visible and
accessible.

103

«
...
113
114
115
116
117
...
»

Содержание ProStar+

















































































































































































































































































































Отзывы:

Нет отзывов