User’s manual NAVIGON 63xx
- 84 -
Handsfree Module
►
Tap on Accept if you want to take the call.
The
C
ALL IN
P
ROGRESS
window opens.
►
Tap on Reject if you do not want to take the call.
Note:
Navigation instructions are muted during a call.
11.3
Making a call
With the
NAVIGON 63xx
you can make a call in various ways:
11.3.1
Making a call with the voice commands function
It is particularly convenient to make a call with the voice commands
function.
1. In
the
H
ANDSFREE
M
ODULE
window tap on Voice Command.
The
V
OICE
C
OMMAND
window opens.
Specifying a phone number
2. Say
"Telephone
Number".
Say the number that you want to call.
Note:
You have to say each number separately but you can say the
numbers in blocks. For example, say "nine-four-three-three" for the
number block 9433.
3. Wait for the numbers you said to appear.
Repeat steps 2 to 3 until the complete phone number is shown on
the display. Say "Correction" if the last number you said was not
understood correctly.
4. Say
"Call".
The phone number will be dialled.
Calling a contact from the phone book
2. Say "Phone Book".
3. Say the name of the contact you want to call.
If several entries are recognised as matching this name, a list with
these entries will appear.
►
Say the number in front of the contact that you want to call.
If several phone numbers are saved for this contact, a list with
these numbers will appear.
►
Say the number in front of the phone number that you want to call.
The connection will be established.
