User’s manual NAVIGON 63xx
Handsfree Module
- 81 -
The
NAVIGON 63xx
prompts you to enter a password.
5. Enter the same password in the Key box as on the mobile phone
and tap on
(OK).
The pairing is performed and a connection is set up between the
two devices. The connected device is indicated in the
T
RUSTED
D
EVICES
list. (Green symbol
(Connected).)
11.1.3
Connecting to a device
The word connect describes any subsequent connections between
paired Bluetooth devices. No further password entry is necessary when
connecting.
Connecting automatically
Note:
For automatic connection to be possible, the
NAVIGON 63xx
must be saved in the Bluetooth settings on your mobile phone as
"authorised" or "authorised device" (the exact wording can vary from
manufacturer to manufacturer). For more details refer to your mobile
phone manual.
If the device you want to connect to was the last connected device and
the Reconnect Automatically setting is activated, the connection will be
set up automatically as soon as the device is within range.
Connecting manually
If a Bluetooth connection to a device is active, you must disconnect this
connection first before you can connect to a different device. The
existing connection is disconnected automatically as soon as the
connection to a different device is initiated.
1. Make sure that Bluetooth is activated on your navigation device.
►
If you want to connect to a mobile phone, make sure that Bluetooth
is activated on the mobile phone and that the Discoverable by
Others and Others May Connect functions are also activated.
►
If you want to connect to a headset, make sure that the headset is
switched on.
2. Tap on the
(Trusted Devices) button in the
H
ANDSFREE
M
ODULE
window.
The
T
RUSTED
D
EVICES
window opens. A currently connected device
is indicated by the green symbol
(Connected).