User’s manual NAVIGON 63xx
- 48 -
Options
If you select a route for which traffic obstructions have been announced,
the
P
REVIEW
TMC
window may open before navigation starts. (Refer to
"Preview TMC" on page 73)
►
Select whether you want to use the original route (Current Route) or
a detour (Alternative Route).
No GPS reception
If GPS signal reception is not good enough, the following message will
appear: "GPS reception is currently not sufficient. Navigation starts
automatically as soon as GPS reception is OK again."
You have the following options:
►
Wait. As soon as GPS reception is good enough for determining
your position, the route will be recalculated and navigation will
begin.
►
Tap on Cancel. The map opens in
Preview
mode.
8 Options
Some windows offer options that lead to more functions.
►
Tap on Options to open the options list.
►
Tap on the option you would like to use.
►
If you would like to quit the options list without selecting an option,
tap on the Options button again.
2D/3D: Changes between 2D and 3D mode. The symbol indicates the current
mode.
Delete All: Deletes all destinations in the list (
L
AST
D
ESTINATIONS
list or
F
AVOURITES
list, depending on where you opened the options). The list
is then empty. A dialog window prompts you to confirm deletion.
Save as Favourite: Saves the selected destination to the
F
AVOURITES
list. (Refer
to "Saving destinations" on page 41)
Show on Map: Shows the selected address on the map.
Start Recording, Stop Recording: Starts or ends the recording of a track. (Refer
to "Tracks" on page 66)
Factory Settings: Resets all settings to the as-delivered state. Routes and
saved destinations are deleted. The software is re-started and behaves
as if started for the first time after being purchased (refer to "Switching
on the NAVIGON 63xx" on page 15).
Settings: Opens the
S
ETTINGS
window. Here you can configure the navigation
system. (Refer to "Configuring the NAVIGON 63xx" on page 90)