3
Contents
Contents
3.1 Record Identification Data
3.2 Point Count Capacity and Registers per Device
3.3 Configuring Device Communications
3.3.1 Input COM Settings on Any Serial Device Connected
3.3.2 Set Node-ID for Any Device Attached to the Gateway
4. INTERFACING GATEWAY TO DEVICES
4.2 NFB-301C/399C boiler Connections to Gateway
4.2.1 Biasing the RS-485 Device Network
4.2.2 End of Line Termination Switch for the RS-485 Device
4.3 Wiring LonWorks Devices to the LonWorks Terminal
5. USE THE GATEWAY WEB CONFIGURATOR TO
5.1 Connect the PC to the Gateway via the Ethernet Port
5.1.1 Changing the Subnet of the Connected PC
6.1 Accessing the Gateway Web Configurator
6.2 Selecting Profiles for Devices Connected to Gateway
6.2.1 Verify Device Communications
7. HOW TO START THE INSTALLATION OVER:
8. COMMISSIONING GATEWAY ON A LONWORKS
8.1 Commissioning Gateway on a LonWorks Network
8.1.1 Instructions to Upload XIF File from Gateway Using
9. SMC CLOUD USER SETUP, REGISTRATION AND
Appendix A.1 Lost or Incorrect IP Address
Appendix A.2 Viewing Diagnostic Information
Appendix A.3 Check Wiring and Settings
Appendix A.4 LED Diagnostics for Communications
Appendix A.5 Take a FieldServer Diagnostic Capture
Appendix A.5.1 Using the FieldServer Toolbox
Appendix B. Additional Information
Appendix B.2 Securing Gateway with Passwords
Appendix C. Vendor Information – Navien
Appendix C.1 NFB-C Single Boiler Modbus RTU Mappings
Appendix C.2 NFB-C Main 1 Sub 1 - Sub 31 Modbus RTU
Appendix D.1.1 Compliance with UL Regulations
Содержание LonWorks Gateway
Страница 12: ...12 USE THE GATEWAY WEB CONFIGURATOR TO SETUP THE GATEWAY This Page Intentionally Left Blank...
Страница 46: ...Memo...
Страница 47: ...Memo...