Navien LonWorks Gateway, Руководство по установке и эксплуатации

Страница: 13 / 48

13 CONFIGURE THE GATEWAY
6.1 Accessing the Gateway Web
Configurator
1. Navigate to the IP Address of the gateway on the local PC
using one of two methods:
●
Open a web browser and enter the IP Address of the
gateway; the default Ethernet address is 192.168.1.24.
●
If using the FieldServer Toolbox (
Section 5.1.2
), click the
Connect button.
Note
If the IP Address of the gateway has been changed,
the IP Address can be discovered using the FS
Toolbox utility. See
Appendix A.1
for instructions.
2. Once at the Web App splash page, click the Login button.
Figure 15: Web App Splash Page
3. Enter the previously set up or default username and password.
Note
The default username is “admin”. The default
password is “admin”.
Figure 16: Login Window
4. From the Web App landing page (Figure 17), click the
Configure tab.
Figure 17: Web App Landing Page
5. Then click the Profiles Configuration button to go to the Web
Configurator page.
Figure 18: Configure Tab
Note
●
The SMC Cloud ™ tab (see Figure 18) allows
users to connect to the SMC Cloud, Sierra
Monitor’s device cloud solution for IIoT. The
SMC Cloud enables secure remote connection
to field devices through a FieldServer and its
local applications for configuration,
management, maintenance. For more
information about the SMC Cloud, refer to the
SMC Cloud Start-up Guide.
●
For Web App instructions to the System View,
Historian and Event Logger functions, see the
SMC Cloud Start-up Guide.
6. CONFIGURE THE GATEWAY