Navico SIMRAD AI50 Скачать руководство пользователя страница 74

Страница: 74 / 84

74 Alarms

The icon of the vessel which caused the alarm to activate

will change to a “Lost Vessel” icon. Refer to section 7.2.

If the text display is active, the text line for that vessel’s

data will be greyed out.

If reception from the lost vessel’s AIS is re-established,

then the icon will return to its previous state.

8.5 Favorites alarm

This is a Level 3 alarm, and will only display if the option

has been activated in the “Alarm Setup Menu”. If a vessel

entered on your favorites list comes within your VHF range

the following window will open and the alarm will sound.

Figure 8.4 - Favorite ship alert

To confirm and clear this alarm, press

, this will close

the window and return you to current display.

8.6 Loss of compass heading data

This is a Level 3 alarm, and will only activate if the SimNet/

NMEA2000 data for the ships compass is lost.

An audible alarm will sound and a “Loss of Compass” alarm

window will open showing details of the lost compass and

any other compatible compass units on the network.

Highlight an alternative device and select it.

If the

ENTER/MENU

key has been pressed without

selecting a new compass, the unit will continue to operate

without compass information, and any displays consisting

of the vessel’s own heading will be blank.

If “HDG Up” or “North Up” View Point is selected, it will be

cancelled and the display View Point changes to “COG Up”.

Содержание SIMRAD AI50





















































































Результаты поиска

Содержание SIMRAD AI50

Отзывы:

Navico SIMRAD AI50, Руководство по эксплуатации, Страница: 74 / 84

Результаты поиска

Содержание SIMRAD AI50

Отзывы: