Navico SIMRAD AI50 Скачать руководство пользователя страница 67

Страница: 67 / 84

Display Mode 67

7.16 Light adjustment (short cut)

Single presses of the

POWER

key will cycle through

the preset lighting levels, in 20% steps, for both the

keypad and display.

When changing light levels in this mode, the keypad light

will only go to a minimum of 10%. This is to allow for

viewing at night.

The current backlighting settings will be stored when the

AI50 is powered down.

For further lighting options refer to section 6.3.

7.17 KeyLock function

The AI50 has the ability to lock the keypad to prevent

accidental key presses.

Lock -

To lock the keypad press

POWER

once. A

window will open and display the following message.

Figure 7.11 - Keypad lock message

Pressing

ENTER/MENU

will lock the keypad, and the

screen will revert back to its previous display, the keypad

is now locked.

Unlock -

To unlock the keypad press

POWER

once. A

window will open and display the following message.

Figure 7.12 - Keypad unlock message

)

Содержание SIMRAD AI50





















































































Результаты поиска

Содержание SIMRAD AI50

Отзывы:

Navico SIMRAD AI50, Руководство по эксплуатации, Страница: 67 / 84

Результаты поиска

Содержание SIMRAD AI50

Отзывы: