Navico SIMRAD AI50 Скачать руководство пользователя страница 70

Страница: 70 / 84

70 Alarms

8.2 Collision avoidance alarms

The Simrad AI50 boasts a sophisticated, very simple

to use, collision avoidance alarm system. Which, when

enabled, becomes an important aid in the prevention of

collisions at sea and ensures even greater safety for your

vessel and passengers.

These collision alarms are:

CPA/TCPA alarm

Lost Vessel alarm

Guard Zone alarm

CPA/TCPA alarm

This is a Level 1 alarm. If you have activated the CPA/TCPA

Alarm from within the “Alarm Setup” Menu, the CPA/TCPA is

then calculated from the received position, COG and SOG of

the AIS transmissions, from all AIS equipped vessels within

VHF range.

CPA – “Closest Point of Approach” is the calculated

distance of how close a vessel will pass.

TCPA – “Time to Closest Point of Approach” is the

calculated time to reach the CPA.

The CPA/TCPA alarm values are set by the user, as

described in section 6.5. These are based on the last

calculated COG and SOG, assuming the vessel continues

on the same course, at the same speed.

It is the responsibility of the user to determine

how close another vessel may pass without being

dangerous, and how quickly the user can react to

manoeuvre their own vessel in order to avoid a

collision.

If both values calculated by the AI50 are less than, or

equal to the values set by the user, then an alarm will

activate, regardless of what screen the unit is in.

An audible alarm will sound and a window will open

displaying the following information. Figure 8.1.

•
•
•

)

Содержание SIMRAD AI50





















































































Результаты поиска

Содержание SIMRAD AI50

Отзывы:

Navico SIMRAD AI50, Руководство по эксплуатации, Страница: 70 / 84

Результаты поиска

Содержание SIMRAD AI50

Отзывы: