Navico SIMRAD AI50 Скачать руководство пользователя страница 38

Страница: 38 / 84

38 Menu Mode

Display brightness

This option allows you to change the brightness of the

display in 10% steps, between 0-100%.

Highlight “Display Brightness” and select it. This opens a

box with the current value in.

Figure 6.5 – Changing display settings

Scroll through the pre defined values for a suitable level,

then select it.

Keypad brightness

This option allows you to change the brightness of the

keypad in 10% steps, between 0-100%.

Highlight “Keypad Brightness” and select it. This opens a

box with the current value in.

Scroll through the pre defined values for a suitable level,

then select it.

Keypad color

This option allows you to change the color of the keypad

backlighting.

Highlight “Keypad Color” and select it. This opens a box with

the current selected color. To change it between “White” or

“Red”, simply select it.

Display palette

This option allows you to change the display color palette

from a bright high visibility one ideal for daytime operation,

to a low intensity one ideal for night time operation.

Содержание SIMRAD AI50





















































































Результаты поиска

Содержание SIMRAD AI50

Отзывы:

Navico SIMRAD AI50, Руководство по эксплуатации, Страница: 38 / 84

Результаты поиска

Содержание SIMRAD AI50

Отзывы: