First time startup configuration
⚠
Warning:
Never operate the radio without the antenna connected. This may damage the
transmitter.
T
he first time the radio is po
wered up, the user is prompted to make a series of setting selections in order
to allow the radio to perform to its full potential. Some steps must be completed; some are optional and
can be completed later.
¼
Note:
Press DSC/MENU key to move the cursor 1 digit to the left; press TRI key to skip this screen and
move to the next; press X key to go back one screen.
The steps are outlined below for reference:
1
Select the country and region the radio will be operated in.
2
Enter MMSI number if known, or skip to next step. Re-enter number to con
fi
rm correct entry:
¼
Note:
MMSI entry can only be done once. Changing the MMSI requires radio be returned to a Simrad/
B&G dealer.
3
If you have selected the Country mode to be EU, some EU regions require you to setup ATIS. Enter the ATIS
ID number. Re-enter number to con
fi
rm correct entry:
4
Enter vessel call sign if known, or skip to next step (maximum 7 digits):
5
Select a GPS source:
NRS-1
NRS-2
| 61
Installation |
RS100 / RS100-B / V100 / V100-B User Manual