Navico B&G V100 Скачать руководство пользователя

Страница: 32 / 87

Wireless handset (WHS)

Pair a wireless handset

The pairing process only needs to be performed once per WHS:

Ensure the WHS that you want to pair to the radio is charged and turned OFF.

Note:

Ensure all other WHS’s remains OFF during this procedure.

Access the radio’s Main menu fr

om a fix

ed handset, and select HANDSETS > WIRELESS HANDSET.

Select PAIR A HANDSET. Select YES.

Turn ON the wireless handset that you want to pair to the radio. The WHS display will show
SEARCHING...

Press and hold the

SCAN

key on the WHS until HANDSET IS PAIRING appears.

Note:

The wireless handset will search for the host radio, if it locates the radio it will complete the

pairing process within few minutes.

Repeat steps 2-5 to pair the next handset.

Remove a WHS

To delete an already paired handset:

Select REMOVE A WHS from the WIRELESS HANDSET submenu.

Select the handset you want to remove, press the

key, and select YES.

Locate a WHS

To locate an already paired wireless handset:

Select LOCATE A WHS from the WIRELESS HANDSET submenu.

Use

and

to select the handset you wish to locate.

Press

. The handset to be located will commence beeping for 30 seconds if it is turned ON within

the wireless range.

Configure WHS audio

You can select an option to repeat the audio between the WHS and the host radio.

Note:

In some situations, this can result in audio feedback if the wireless handset is too close to the

host radio’s speakers.

Repeat WHS audio

Select to repeat the wireless handset audio on the host radio.

Repeat Host Radio audio

Select to repeat the host radio audio on the wireless handset.

Configure handset

Select CONFIGURE HANDSET in the menu to assign a name of your handset.

Use

and

to select the handset you want to name and press

Enter the handset name. To enter a character, refer to “Entry of alphanumeric data” on page 12.

Press

DSC/MENU

to save the name.

Using the wireless handset

Turning the wireless handset ON/OFF

Long press the

key to turn ON the wireless handset. The handset will display the wireless handset’s

software version and then attempt to reconnect with the host radio. Once connected, use the wireless
handset in the same way as you w

ould be using a fix

ed handset.

32 |

Radio menus |

RS100 / RS100-B / V100 / V100-B User Manual

Содержание B&G V100
























































































Результаты поиска

Содержание B&G V100

Отзывы:

Похожие инструкции для B&G V100

Бренды по названию

Популярные бренды

Navico B&G V100, Руководство пользователя

Результаты поиска

Содержание B&G V100

Отзывы:

Похожие инструкции для B&G V100

Бренды по названию

Популярные бренды