Mounting the Speaker
¼
Note:
The wired speaker is pro
vided with a 2m (6.5’) fix
ed cable. The cable maybe extended if
necessary using a minimum 14 AWG 2-pair cable.
Flush mounting
1
Cut a 98 mm (3.86”) diameter hole in the mounting surface, allowing space for the speaker’s overall
dimensions.
2
Remove the plastic bezels that cover the screw holes. Temporar
ily fit the speak
er and mark the four screw
holes.
3
Drill holes of appropriate size for fasteners to be used.
4
Fit the foam gasket to the rear of the speaker. Apply sealant to the screw holes and secure the speaker.
R
efit the plastic bez
els piece.
2
1
3
4
| 53
Installation |
RS100 / RS100-B / V100 / V100-B User Manual