Surface mounting
1
Remove the plastic bezels that cover the screw holes on speaker front. Mark the screw holes using the
speaker as the template.
2
Drill holes of appropriate size for the fasteners to be used.
•
Drill a hole in the mounting surface for the speaker wire, ensuring hole is near one of the corner
screw holes, to prevent cable pinching under speaker.
3
Feed speaker wire through surface mount box and through mounting surface hole.
•
Apply sealant around the cable hole and the screw holes.
•
Fix the speaker with fasteners through it and the box.
•
Make sure the drain hole in box is oriented to be at lowest side.
•
Replace the plastic bezels.
1
2
3
54 |
Installation |
RS100 / RS100-B / V100 / V100-B User Manual