Nautronic NAUCON-1000, Руководство пользователя

Страница: 48 / 52

48
| NAUCON-1000 – USER MANUAL
THE LEDS INDICATE THE FOLLOWING,
WHEN A SCOREBOARD IS WORKING
PROPERLY:
→ D1, D2, D3, D4 and D5 constantly
light green.
→ D6 flashes red rapidly.
→ D7 flashes yellow once per second.
→ D8 flashes red rapidly – but only if a
radio module is present.
D1 – MAIN
If D1 light is off:
Check main power connection.
D2 – 230V/AC LED
If D2 light is off:
Check fuse F3.
Press and turn F3 at the
same time to check if the fuse is blown and
must be replaced.
D3 – 12V/DC HORN
If D3 light is off:
Check fuse F1.
Press and turn F1 at the
same time to check if the fuse is blown and
must be replaced.
D4
–
24V/DC DIGIT
If D4 light is off:
Check fuse F2.
Press and turn F2 at the
same time to check if the fuse is blown and
must be replaced.
D5
–
24V/DC FOR THE NAUCON-1000
If D5 light is off:
Remove all plugs connected to J2, J3
and J4. If D5 light turns on, there might be
a short circuit in the cables or in
the NAUCON-1000.
D6
–
DATA COMMUNICATION
If D6 light is off:
There is no data reception.
→ Check the cable connected to the con -
trol panel.
→ Check the wall connector.
→ Turn the power to the scoreboard off,
wait for 5 seconds and turn it back on. If
still without function, contact the local
scoreboard supplier for instructions.
D7
–
INTERNAL OPERATION
If D7 light is either off or constantly on:
Internal units in the scoreboard might
be damaged.
D8
–
WIRELESS COMMUNICATION
If D8 light is off:
There is no radio signal reception.
→ Wireless module must be installed for
D8 to function.
→
Make sure the NAUCON-1000 is turned
on.
FUSES:
F1 → 5AF
F2 → 5AF
F3 → 1AT
D1
MAIN
F3
1AT
250V
D2
230V
D2
D1
F3
J2
Wireless module
J3 J4
D8 D7 D6 D5 D4 D3
F2 F1
HARDWARE PROBLEMS: Locate the problem with a little help from the service led’s and
the illustration below,
Fig. 40
.
Trouble shooting
Fig. 40 – The bottom of a scoreboard