Nautronic NAUCON-1000, Руководство пользователя

Страница: 50 / 52

50
| NAUCON-1000 – USER MANUAL
RELAY 1 –
fault:
→ Cable or horn incorrectly connected to
J7 .
RELAY 2 –
fault:
→ Cable or horn incorrectly connected to
J8 .
RELAY 3 –
fault:
→ NG out or LED strip incorrectly connect -
ed to J9 .
12V IN –
fault:
→ No 12V/AC supply.
12V FUSE –
fault:
→ Fuse F1 is blown.
24V IN –
fault:
→ No 24V/AC supply.
24V FUSE –
fault:
→ Fuse F2 is blown.
NAUNET 24V –
fault:
→ Fuse F2 is blown.
NAUNET GND –
fault:
→ Possible short circuit on equipment
connected to the NGMCB.
EXTRA 24V –
fault:
→ Fuse F12 is blown. *
1
EXTRA RELAY –
fault:
→ N/A, not used. *
1
DCF77 –
fault:
→ NG-DCF has a bad reception or it is not
installed correctly. *
2
DIP1 –
default:
→ 0 – 00000000
DIP2 –
default:
→ 0 – 00000000
DIP3 –
default:
→ 11 – 00001011
DIAGNOSTIC FOR WIRELESS POWER
SHOWS CHECKSUM:
→ 0-17 and can only be edited when a test
is started.
Start the wireless test:
Press START TEST
and thereafter RESET TEST :
TOTAL RETRY COUNT
0 → OK / Counting → ERROR
Error:
Fault in the communication.
SEND PACKETS
Counting *
3
→ OK
0 → Error:
The radio in the NAUCON-1000
might be damaged.
RECEIVE PACKETS
Counting *
3
→ OK
0 → Error:
The radio on the NGMCB might
be damaged.
BOARD RECEIVES
Counting *
3
→ OK
0 → Error:
The radio in the NAUCON-1000
might be damaged.
PACKETS LOSS
0 → OK
Counting → Error:
Lost packets.
What is the reason why errors occur and testing.
Diagnostic troubleshooting guide
*
1
Only displayed on scoreboards with
NGP-85 mounted.
*
2
Only displayed on scoreboards with
NG-DCF module mounted.
*
3
Should show almost the same value.