Nautilus StairMaster ClubTrack 2100 Series, Руководство по обслуживанию

Страница: 85 / 92

80
ClubTrack
®
2100 Series Treadmill Service Manual
Appendix D
Using a Multimeter
How to Use a Multimeter
This is a basic overview of multimeters. For in depth directions, please use the manual provided with your
multimeter.
Whats Does a Multimeter Do?
A multimeter combines the functions of three instruments: ammeter (measures current), voltmeter
(measures voltage), and ohmmeter (measures resistance).
Electronic signals are usually thought of in terms of voltage. For that reason, and because it is an easier
measurement to take, we will use the volts setting. We will not want to use the ammeter setting to
troubleshoot fitness equipment.
The ohmmeter setting is used to determine whether there is an open circuit (a bad connection or break in
the wires) or a short circuit (two wires that normally would not come in contact with each other have been
pinched together or crossed in some way).
Ohmmeters work by passing a small current through the wire or component and measuring the voltage
produced.
Type of Multimeters
Multimeters are available in digital and analog models. Digital meters give an output in numbers usually on
a LCD. Analog meters move a needle along a scale.
We recommend using a digital meter. While analog meters can be very cheap, they are difficult for beginner
to read accurately, especially on resistance scales. Also, the components are delicate and easily damaged.
Settings
For the beginner the multimeter can be intimidating because of the range of settings available. The
diagrams on page 75 show what settings to use when checking voltage and resistance on the fitness
equipment. Perhaps more importantly, it shows which settings are not needed.
There are two types of digital multimeters commonly available:
• switched range and
• autoranging.
Switched range meters require you to choose the appropriate position from the many choices available
on the dial. For example, if the dial is switched to 20VDC, 20 volts is the maximum voltage that can be
measured. This is important when you want to read small increments in voltage accurately. For example, if
the required voltage is 13.5 volts and the meter is set too high, you may only see 13 volts on the readout.
Setting the meter to a lower maximum will show 13.5 volts.
Autoranging meters automatically adjust the range to give an accurate reading. This type of meter is
more expensive but much easier to use.