Nautilus StairMaster ClubTrack 2100 Series, Руководство по обслуживанию

Страница: 36 / 92

32
ClubTrack
®
2100 Series Treadmill Service Manual
Table 3–2. Electronic Issues
Problem Possible Causes Remedy
Walking belt stops, and no error
message appears.
User hit the Ergo stop button. • Press START to resume
workout.
Ergo PCB is not grounded. • Ground the Ergo PCB.
CHR does not work. Contact plates have excessive
moisture under them.
• Replace the contact plates if
cleaning them first does not
resolve the problem.
• Replace the CHR PCB.
Error Reporting
The current lists of errors are for the firmware version LED 1.0 and LCD 5.0. The system reports various problems to
the user via the display. The format includes the text line reporting the error.
Definitions
Warning
—A message that appears on the console display that informs you of a condition that requires attention
but does not stop treadmill operation.
Error
—A message that appears on the console display that informs you of a condition that halts the operation of
the treadmill and which requires immediate attention.
Table 3–3. Error List
Label Type Response Description
NO ERROR N/A Displayed in the Error Log if no
events.
Placeholder label.
PROGRAM
ERROR
Error Start-up—Stops operation. ALL—Microprocessor fails self-test
program memory check sum error.
Display will be blank and the console
will beep twice.
STATIC RAM
ERROR
Error Start-up—Stops operation. ALL—Microprocessor fails self-test
RAM check sum error. Display will be
blank, and the console will beep. It
will beep three times for an Internal
RAM error. It will beep four times for
an external RAM error.
EEPROM ERROR Error Start-up—Stops operation. ALL—Microprocessor fails self-test
EEPROM chksum error. All of the
EPROM values will be loaded with
the defaults. No error message
appears.
TM HW COM
ERROR
Error Anytime—Goes to idle. Treadmill
slowly stops.
Treadmill UART hardware link failure.
TM COM ERROR Error Anytime—Goes to idle. Treadmill
slowly stops.
Treadmill E204 drive communication
failure low.
DRIVE ERROR Error Program operation—Goes to idle.
Treadmill stops quickly.
Treadmill E209 output switching fault
low.
Error Reporting