Nautilus StairMaster ClubTrack 2100 Series, Руководство по обслуживанию

Страница: 6 / 92

ClubTrack
®
2100 Series Treadmill Service Manual
2
Viewing Maintenance Information
The total time and distance the treadmill has been in use can be viewed using the Machine Status console codes.
This information can help you schedule treadmill maintenance and check treadmill usage.
To view the treadmill’s run-time information:
1 Press CLEAR, 4, 0, and ENTER. The controller will display the machine run time in hours since last cleared.
2 Press CLEAR to exit.
To view the total distance the treadmill has been used:
1 Press CLEAR, 4, 2, and ENTER. The controller will display the total distance the machine has gone since last
cleared.
2 Press CLEAR to exit.
Routine Maintenance Schedules
Performing routine maintenance will help prevent unnecessary wear to the treadmill and/or injury to the user. The
maintenance schedules are meant only to serve as a guide. Depending on where and how the treadmill is being
used, more frequent routine maintenance may be required.
Daily
• Inspect the power cord and walking belt for wear.
• Check the position of the walking belt. Verify it is not rubbing against the frame. The belt should be evenly
spaced on the deck within 0.25 inches. Adjust the belt if necessary.
• Check the optional side handrails to ensure they are fastened securely.
• Remove potential hazards from the treadmill area.
Cleaning
Keeping the StairMaster ® 2100 LC/LE treadmill clean on a regular basis will help to improve operation and increase
the lifespan of the components.
Daily
• Keep the treadmill and controller free of dust and debris. Use a damp sponge to wipe the exteriors and walking
belt; do not soak surfaces. Dry all surfaces thoroughly.
Cleaning
DRY MOP THE DECK UNDER THE BELT ONLY. DO NOT ADD
ANY LUBRICANTS—ADDING LUBRICANTS CAN RUIN THE
PROPRIETARY FRICTION-CONTROL SURFACE.
DO NOT USE DETERGENTS OR CLEANING AGENTS ON ANY PART
OF THE DECK.
DO NOT LET LIQUID ENTER THE TREADMILL OR CONTROLLER. IF
IT DOES, THE EQUIPMENT MUST BE INSPECTED AND TESTED
FOR SAFETY BY A STAIRMASTER ® -APPROVED TECHNICIAN
BEFORE IT CAN BE USED AGAIN.
� � � � � � �
� � � � � � � � �
� � � � � �
�������������������������
� � � � � � �