Maintenance
Clean
1. Upholstery with a mild soap and water
2. Hand Grips with mild soap and water
3. All outside surfaces with non-abrasive, non-chlorinated household cleaners
Cleaning the Shields
The shields are made of Polypropylene. Adherence to regular and proper cleaning procedures is recommended to
preserve the appearance.
Washing to Minimize Scratches
Wash Polypropylene with a mild soap or detergent (e.g. Original Dawn Dish washing liquid) and lukewarm water using
a clean sponge or a soft cloth. Rise well with clean water. Dry thoroughly with a chamois or moist cellulose sponge to
prevent water spots. DO NOT SCRUB OR USE BRUSHES ON THESE PRODUCTS.
Fresh paint splashes, grease and smeared glazing compounds can be removed easily before drying, by rubbing lightly with
isopropyl alcohol. Afterward, use a warm final wash with mild soap or detergent and rinse.
The safety and performance of this product can be maintained only if it is inspected regularly for damage
and wear.
Pay particular attention to components most susceptible to wear such as belts, belt termination points and
position adjustments.
Remove any damaged machine from service and replace damaged components immediately.
Direct any question regarding mantenance or its function to a qualified Nautilus Technician. For contact
information please see the Important Contact Numbers page at the back of this manual.
Daily
Weekly
Monthly
Every 6 mos.
General Maintenance
Check Safety & Warning Labels
X
Spot Check Cables / Belts
X
Spot Check Pulleys
X
Spot Check Nuts and Bolts
X
Spot Check All Pegs and Stops
X
Examine Rotation Points
X
Cleaning
Clean Upholstery
X
Clean Surface Area
X
X
Remove Dust
Maintenance Schedule
Owner’s Manual
20