background image

3

IMPORTANT SAFETY INSTRUCTIONS

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious 
injury.

Obey the following warnings:

Read and understand all warnings on this machine.

Carefully read and understand the Assembly instructions. Read and understand the complete 

Manual. Keep the Manual for future reference.

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug this 
machine from the electrical outlet immediately after using and before cleaning.

•  Keep bystanders and children away from the product you are assembling at all times.
•  Do not connect power supply to the machine until instructed to do so.
•  The machine should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting 

RQRUWDNLQJRႇSDUWV

‡ %HIRUHHDFKXVHH[DPLQHWKHPDFKLQHIRUGDPDJHWRSRZHUFRUGORRVHSDUWVRUVLJQVRIZHDU'RQRWXVHLIIRXQGLQ

this condition. If purchased in US/Canada, contact Customer Service for repair information. If purchased outside US/
Canada, contact your local distributor for repair information.

•  Do not drop or put objects into any opening of the machine.
•  Do not assemble this machine outdoors or in a wet or moist location.

‡ 0DNHVXUHDVVHPEO\LVGRQHLQDQDSSURSULDWHZRUNVSDFHDZD\IURPIRRWWUDႈFDQGH[SRVXUHWRE\VWDQGHUV

•  Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps 

involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.

•  Set up this machine on a solid, level, horizontal surface.
•  Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and 

will void the warranty.

•  If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use 

genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the 
warranty.

•  Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the 

Manual.

•  Use this machine only for its intended use as described in this manual. Do not use attachments not recommended by 

the manufacturer.

•  Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.
•  Connect this machine to a properly grounded outlet only (see Grounding or Earthing Instructions).
•  Keep the power cord away from heat sources and hot surfaces.
•  Do not operate where aerosol products are being used. 

‡ 7RGLVFRQQHFWWXUQDOOFRQWUROVWRWKHRႇSRVLWLRQWKHQUHPRYHSOXJIURPRXWOHW

•  Silicone lubricant is not intended for human consumption. Keep out of reach of children. Store in a safe place.
• SAVE 

THESE 

INSTRUCTIONS.

Содержание E618

























































Отзывы: