Nautilus Hyosung MONiMAX5300, Руководство по обслуживанию

Страница: 79 / 146

Chapter6. Safe Unit Service Manual
6-2 © 2016 Nautilus Hyosung Inc. All Rights Reserved.
How to set the new password
▶
Changing the combination on the changing index
To change the combination, you will need the existing combination and a LA
GARD Group 2M Change Key (P/N 1307). When selecting a combination
choose a three number sequence from 0 - 99. For security purposes LA GARD
recommends that you never select a combination from personal data (birthday,
phone number, etc.)
Never select a number from 0 to 20 (the forbidden
zone) as the last number of the combination.
To change the combination, you must first open the safe door by dialing the
existing combination on the OPENING INDEX. Before changing combinations,
verify that the dial stops between 90 and 0 on the OPENING Index when the
lock bolt is fully retracted.
NEVER REMOVE THE LOCK COVER.
1. Next dial the existing combination, as previously described, on the CHANGING
Index, but STOP the dial on the third number of the combination.
2. Insert the Change Key into the key hole. If the Change Key does not go in easily, the
wheels are not aligned for changing. Redial the existing combination on the
CHANGING Index.
3. Turn the Change Key to the RIGHT until it stops (approximately one-quarter turn).
Leave the key in the lock. Select a new combination, such as 44-61-96.
4. Still using the CHANGING INDEX, turn the dial to the LEFT and pass 44 three
times and stop exactly on 44 the fourth time the number aligns at the CHANGING
Index.
5. Turn the dial to the RIGHT and pass 61 two times and stop exactly on 61 the
third time the number aligns at the CHANGING Index.
6. Turn the dial LEFT and pass 96 once and stop exactly on 96 the second time
the number aligns at the Changing Index. Leave the dial on 96.
7. Hold the dial steady, turn the Change Key to the LEFT until it stops (approximately
one-quarter turn counterclockwise) and REMOVE the key.
Test the new combination by dialing it to the OPENING Index several times.
When testing you must make the final turn to the stopping point (90 - 0) to be certain
the bolt retracts.
CAUTION!
After changing the combination always dial the new combination and retract the
combination lock bolt several times before shutting and locking the vault or safe
door.