Nautilus Hyosung MONiMAX5300, Руководство по обслуживанию

Страница: 51 / 146

Chapter4. Control Electronics Service Manual
4-14 © 2016 Nautilus Hyosung Inc. All Rights Reserved.
4. AGP Slot
This motherboard provides an AGP Slot, only support the 1.5V 4X/0.8V 8X AGP VGA
card.
Do not use AGP 2X card (3.3V) in this motherboard. It will burn and damage the
motherboard due to Intel® 848 chipset can not support AGP 2X (3.3V).
IMPORTANT!
Before you plug-in AGP card, please make sure the following notice is fully understood
and practiced. If your AGP card has “AGP 4X notch (show below) please make sure
your AGP card is AGP 4X/8X (1.5V/0.8V) not AGP 2X (3.3V)
Example 1:
SiS 305 & ATi Rage 128 Pro AGP card those golden finger is compatible with 2X/4X mode
AGP slot, but only can support 2X (3.3V) only. If you install these cards in Intel® 848
based motherboard it will burn and damage the motherboard
Example 2:
We also find Diamond Vipper V770 golden finger is design for 2X/4X mode AGP Slot. It
can be adjusted the jumper for AGP 2X (3.3V) or AGP 4X (1.5V). But the factory default
setting is 2X (3.3V). If you install this AGP card in motherboard without change the
jumper setting to 4X (1.5V), it will burn the motherboard.