© 2012
Nautilus Hyosung Inc.
All Rights Reserved
.
4-5
Installation Manual
Chapter4. System Installation
Checking the location of the opening in the wall to estimate whether the collar can be
installed
► Refer to the values below for the maximum gap allowed between the wall and the
MX-7600DA ATM.
1
33.85mm [1.33inch]
2
25.5mm [1.00inch]
3
12.10mm [0.48inch]
4
26.70mm [1.05inch]
<
Note!
>
In case the wall clearances are less than the above dimensions, just take out the collar
locking bracket and put it together again after installing the machine.
