© 2012
Nautilus Hyosung Inc.
All Rights Reserved
.
4-3
Installation Manual
Chapter4. System Installation
Bolting Down the MX7600DA
► To bolt down the MX7600DA using the Anchor Bolt Location Sheet (template), perform
the following steps:
1. Ensure that the surface where the MX7600DA is to be placed is level so that the
unit will not tip over when opening the upper/lower modules doors.
2. Place the anchor bolt location sheet where the MX7600DA is to be installed.
3. Drill the correct diameter and depth holes at the locations marked on the sheet.
4. With the groove of the anchor bolt facing up, drive the anchors into the holes drilled
in step 3.
5. Place the MX7600DA on the bolt location sheet, matching the mounting holes of
the unit with the anchors.
6. Firmly tighten the mounting bolts in the anchors.
► The following diagram is a sample of the Anchor Bolts Location Sheet for the
MX7600DA ATM.
