![background image](http://html1.mh-extra.com/html/nautilus-hyosung/monimax-7600da/monimax-7600da_installation-manual_3513130020.webp)
© 2012
Nautilus Hyosung Inc.
All Rights Reserved
.
3-7
Installation Manual
Chapter3. Installation Information
Exterior Wall
▶
Hole in the Wall for Installation
The wall should be prepared according to the following guidelines before installing the
MX7600DA ATM.
The installation of a TTW is based on the floor from customer’s foot outside of
the building.
The maximum thickness of wall used should not exceed 237mm (9.33 inch).
After installing the TTW, the gap between the collar and wall must be waterproofed
using silicon.
The “minimum maintenance space” should be secured in the rear of the TTW.
For all of the measurements shown on the plan, ±5mm (0.2 inch) tolerance should be
kept.