© 2012
Nautilus Hyosung Inc.
All Rights Reserved
.
4-6
Installation Manual
Chapter4. System Installation
Inserting the Collar Wing
1. Unlocking the collar locking bracket:
▪ Turn off the power.
▪ Open the side door.
▪ Unscrew the thumb screw on the collar stop bracket inside the front body and pull it out
as far as possible.
2. Lift the collar wing so that the pin at the back of the bezel fits into the hole.
3. Push the collar wing in and then push it downward completely.
4. Locking the collar stopper back:
▪ Push the collar stop bracket all the way in so that it is firmly in place.
▪ Push in and turn the thumb screw until it stops.
Collar Stop Bracket
