Nautel NX50, Руководство по установке

Страница: 10 / 74

NX50 Installation Manual Preparing for installation
Page 1-2 Issue 6.1 2021-07-13
6. Unpack the crates in accordance with the instructions provided on the outside of the
crates.
• For each crate, remove the panel labeled
open this side
. The panel is attached
using Philips head screws.
• Remove any visible packing material, including braces, from the crate's interior.
• Remove the remaining outer plywood shell by unscrewing the outer wood panels
from the pallet under the transmitter.
7. Review any assembly notes or instructions contained inside the transmitter crates. (For
sites requiring custom configurations, the instructions provided with the transmitter
replace the instructions provided here.)
8. Gather the parts and tools you will need for installation. For a list of required tools, see
“Parts and tools” on page 10-1 .
9. When you are ready to install the NX50 transmitter, follow the steps shown in
Figure 1.2 on page 1-3 .
TIP When you have completed a task or step, put a check mark beside the step
number.
CAUTION:
FAILURE TO COMPLY WITH RECOMMENDATIONS MAY VOID YOUR MANUFACTURER’S
WARRANTY. FOR MORE INFORMATION, REVIEW YOUR WARRANTY DOCUMENTS.