manualshive.com logo in svg

Nautel NX300, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
Nautel NX300 Скачать руководство пользователя страница 93

NX300 Operations and Maintenance Manual

Operating the transmitter

Issue 3.0  2012-11-01

Page 2-75

•

Transmittter Name

 - Enter an identification for the transmitter/station (e.g., 

NX300_WXYZ). This name will be included in notifiaction emails.

•

Sender Email Address

- Enter as a standard email address (e.g., [email protected]), This is the 

address that will appear in the “From:” line in any email notification received from the 
transmitter. It should be an email registered with the email server.

•

Authentication Required

 

- If your email server requires authentication to send emails, click 

the check box and enter the appropriate Username and Password to allow this. If the 
check box is not selected, the Username and Password fields do not appear. Only TLS 
secured SMTP servers are supported.

•

Username

 - Enter the username for your outgoing email server.

•

Password

 - Enter the password or your outgoing email server.

NOTE

: The transmitter will automatically handle encryption if the associated mail server requires it.

4. When complete click 

Apply

 or click 

Cancel

 to restore the previous settings. Use the 

Test

 

button to enter an email address to test your settings. Enter the email address destination for 
the test mail and click the 

OK

 button to send the test email or the 

Cancel

 button to return 

to the 

Email Configuration

 page.

5. Select a new 

User Settings

 option or press 

X

 to exit this page.

Содержание NX300



































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды