Nautel GV5, Руководство по эксплуатации и техническому обслуживанию, Страница: 98 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.2 2014-07-23 PAGE 3.2.81
Figure 3.2.59: Main Audio editing screens
Use the up and down buttons to locate the desired audio source - MPX ,
Analog L/R
,
MPX Over AES
,
Audio Player -> AES 2, Audio Player
-> AES 1, AES 2 or AES 1 , then press the accept (checkmark) button to
save the change. Press the cancel (
X
) button to discard changes and re-
turn to the previous menu.
Use the up and down buttons to locate the desired stereo mode -
Stereo
,
Right Mono , Left Mono or L+R Mono then press the accept (check-
mark) button to save the change. Press the cancel (
X
) button to discard
changes and return to the previous menu.
Use the up and down buttons to locate the desired preemphasis
characteristic -
0 us
,
25 us
,
50 us
or
75 us
, then press the accept (check-
mark) button to save the change. Press the cancel ( X ) button to discard
changes and return to the previous menu.
Use the up and down buttons to toggle between ON or OFF , then press
the accept (checkmark) button to save the change. Press the cancel ( X )
button to discard changes and return to the previous menu. Default
setting is OFF.
Use the up and down buttons to move the cursor to the desired audio
input and then press the right button to enable editing of the parameter.
Figure 3.2.60 on page 3.2.82
shows all the editing screens for
the Input Levels sub-menu. Within any of the editing screens, use the up
and down buttons to edit a parameter value, noting the minimum and
maximum limitations indicated at the bottom of the display. When com-
plete, press the accept (checkmark) button to save the change. Press the
cancel (
X ) button to discard changes and return to the previous menu.
Use the up and down buttons to select File Playlist or Stream 1 through
Stream 255
, then press the accept (checkmark) button to save the
change. Press the cancel ( X ) button to discard changes and return to the
previous menu.
Use the up and down buttons to select again adjust level between -20
and 10 dB (in 0.01 dB increments), then press the accept (checkmark)
button to save the change. Press the cancel (
X ) button to discard changes
and return to the previous menu
Use the up and down buttons to move the cursor to the desired sub-
menu (Enable or Preset) and then press the right button to enable edit-
ing within the sub-menu. See
Enabling and Operating the Or-
ban Audio Processor, on page 3.2.196
for more details. Press
the cancel ( X ) button to discard changes and return to the previous
menu.