Nautel GV5, Руководство по эксплуатации и техническому обслуживанию, Страница: 78 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.2 2014-07-23 PAGE 3.2.61
Editing or Creating Presets
When a presets page is opened from the menu, (for example see Figure 3.2.43 on page 3.2.60 ), the
Current Settings
of the transmitter are displayed. They define the current operational state of the
transmitter.
Current Settings
can be edited and then immediately activated by pressing the
Save
button.
To edit a saved preset, you must load that preset from the
Presets
page (see Loading Presets, on page
3.2.62 ). If the edited preset was active before it was edited, saving the preset will update the preset,
but the
Current Settings
will not change. To update the operation of the transmitter, re-activate the
preset through the top banner (see Activating Presets, on page 3.2.62 ).
In the top banner (see Activating Presets, on page 3.2.62 ), an asterisk (*) appears next to the preset
name when the
Current Settings
have changed since the last preset was loaded.
Current Settings
are not saved through an ac power cycle; when the transmitter recovers from an ac power loss, it loads
the preset that was last activated.
On the
Presets
page, an asterisk (*) appears next to the preset name in the header when there are
unsaved changes to the preset.
When changes are complete, press the
Save
button and then press the
Save Preset
window’s
Save
button to enable the changes. If you are creating a new preset, you can also enter a new name (e.g.,
Preset 4 - IBOC) in the preset window before clicking the
Save
or
Save New
button.
Parameters that can be edited are discussed in detail in Understanding the Preset Tabs, on page 3.2.63 .
To remove a preset, select it and press the
Delete
button.
To ignore any changes, press
Cancel
to return to the
Presets
page.
NOTE
:
If you change an FM+HD or HD preset, particularly its power level or frequency, it is possible to
optimize the transmitter’s performance using the HD Optimizer function (see
Spectrum/Efficiency
Optimizer, on page 3.2.108
or
Optimizing HD Parameters, on page 3.2.118
).