Nautel GV5, Руководство по эксплуатации и техническому обслуживанию, Страница: 56 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.2 2014-07-23 PAGE 3.2.39
Viewing Instrument Panels
Each instrument panel has a menu bar that may be different from other panels (see Figure 3.2.23 ).
Figure 3.2.23: Instrument Panel Menus
Instrument Panel Procedures
Procedure to view instrument readings on the panel:
 To display a cursor in the panel, click or touch the screen where you want the cursor (see
Figure 3.2.24 on page 3.2.40 ). The cursor position is noted in the upper, right-hand corner of the
panel (e.g., frequency and amplitude for the spectrum analyzer). Select other areas of the
instrument to provide a coarse adjustment of the cursor position.
 To make fine adjustments, use the backward and forward buttons (see Figure 3.2.23 ).
 To enlarge/reduce the instrument panel, use the maximize/minimize buttons. Some instrument
displays show more information when maximized (
e.g.,
EQ Impulse Response
(see
Figure 3.2.25 on
page 3.2.40
)
.
 To display additional settings in the
Spectrum Analyzer
or
Oscilloscope
panel, select the “cog”
button (see Figure 3.2.23 ). For the spectrum analyzer tool, this shows the resolution bandwidth,
span, averaging rate and the actual measurement source (transmitter output, audio analyzer, etc.)
that is being displayed. Select the “peak” button (see
Figure 3.2.23 ) to place the cursor on the next
successive peak in the spectrum.
Each panel has a tool bar at the top of the display
Backward one step
Forward one step
Maximize / Minimize
Cog (more settings)
Exit
Peak (jumps cursor to
the next peak)