Nautel GV5, Руководство по эксплуатации и техническому обслуживанию, Страница: 132 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.2 2014-07-23 PAGE 3.2.115
Updating Firmware
NOTE
: A firmware update is available using the controller UI. It can also be performed from the AUI,
using the
Upgrade Software
page in the
System Settings
menu (see Upgrade Software, on page
3.2.103 ). Once the SBC is reset, all users that were remotely connected (logged in) will be logged out.
From the controller UI, you can update firmware used in the transmitter. To perform a firmware update,
select
System Settings -> Firmware Update
from the
Main Menu
(see Figure 3.2.97 ).
Figure 3.2.97: Firmware Update Screen
Adjusting Display Settings
NOTE
: Controller UI display settings are only available using the controller UI.
From the controller’s UI, you can configure the LCD display’s contrast, brightness and backlight settings.
To view the
LCD Settings
screen, select
User Settings -> LCD Settings
from the
Main Menu
(see
Figure 3.2.98 ).
Figure 3.2.98: LCD Settings Menu
This menu has four sub-menu options:

LCD Contrast
- sets the display contrast.

LCD Backlight
- sets the brightness of the display’s backlight during normal use.

LED Timeout
- sets a time delay, after a period of non-use, that the brightness of the display’s
backlight will dim. This feature can also be disabled.

Menu Timeout
- sets a time delay, after a period of non-use, that the front panel screen will
revert back to the main menu.