7
Selecting and creating clients in Otosuite
When you perform a test and save the measurements, you automatically save the measurements as relating to the current
client.
When you run Otosuite under Noah or Otobase, you select and create clients in Noah/Otobase. See
for a description of how to select a client when you launch Otosuite under Noah or Otobase.
Switching clients while running Otosuite under Noah/Otobase
If you are running Otosuite under Noah/Otobase, you can change clients without closing Otosuite. To select a new client:
1. Click
File
>
New Session
.
The Noah/Otobase Patient Manager window opens.
2. Select a client.
The current client session closes, and a new session opens in the current Otosuite test screen.
Creating a client in stand-alone mode
At startup
When you start up Otosuite, the
Client Details
dialog box will be shown automatically.
Between clients
When you prepare Otosuite for the next client, select
File
>
New Session
, and the
Client
Details
dialog box will be shown.
Where is client data used?
The client data in the
Client Details
dialog box is used in printed reports. You can select
whether or not you want comments that you enter in the
Client Details
dialog box to
appear in printed reports.
Selecting a client in stand-alone mode
To select an existing client, open a previous measurement for that client (
File
>
Open
).
Editing client details and adding comments
To edit client details, click on the
Edit client details
icon (
Crtl + D
).
In stand-alone mode:
You can edit client data, and you can enter comments for the current session.
From Noah/Otobase:
If Otosuite is activated from Noah/Otobase, the client details are retrieved from Noah/Otobase, and the data is not
editable in Otosuite. However, you can add comments in the
Comments
box and they will be saved in Noah/Otobase
with the current session.
Otosuite
User Guide
8
