Note
•
Always print your reports directly from Otosuite. Otosuite reports are not available through the Noah print
function.
If the report shows data from measurements done at an earlier date, the date when the measurement was made is typ-
ically displayed next to the measurement title in factory defined reports.
16.1
Page setup
The page setup for a report can be defined in two ways:
•
The page setup for reports where the report has been designed or edited in Otosuite® Reports:
Define the page setup in Otosuite® Reports
•
The page setup for Otosuite standard reports :
Define the page setup in Otosuite
Otosuite standard reports are formatted for printing on paper in the standard A4 and Letter format. (A single report is
formatted for printing on A5 paper.)
Important
•
Never make your changes to the page setup in the “Page Setup” function available in the “Print Preview”
screen, which is an Internet Explorer function. If you do, this may conflict with the page setup in your Internet
Explorer.
Always make your changes to the page setup in Otosuite® Reports, or, if you use standard reports, directly in Otosuite.
Noah/Otobase:
Otosuite
>
Page Setup
Stand-alone:
File
>
Page Setup
16.2
Printer setup
Otosuite normally uses the Windows default printer, but you can print the measurement results from Otosuite on a
printer of your choice.
•
If you want to select a printer other than the Windows default printer, select
Otosuite
>
Page Setup
and click the
Printer
button.
16.3
Print/Print Preview
1. To view and print a preview, select one of the following:
Stand-alone:
File
>
Print Preview
Noah/Otobase:
OTOsuite
>
Print Preview
2. Fill in the fields in the
Select Report Template
dialog box as follows:
Otosuite
User Guide
18
