2.7
Modify the Test Battery
In addition to establishing collection, review, and report settings, each operator may create a customized test battery (test-
ing sequence).
A. Select
Edit
>
System Options
. Select the
Operator Settings/Test Battery
tab.
B. Arrange the test protocols in the sequence you want to conduct the tests. The Available test protocols (on the left)
lists all possible tests. The Selected test protocols (on the right) lists the operator’s test sequence. Note: if the hard-
ware is not turned on, the Test Battery Lists will be empty because the available protocols are hardware dependent.
System Options, Operator Settings/Test Battery Tab
1. Click the
Operator Settings / Test Battery
tab.
2. Select an operator. If your name is not on the list, go
to
3. Click on a + to show the protocols listed under a pro-
cedure.
4. Click on a protocol or procedure to highlight it.
5. Click the
Insert >>
button to move the highlighted
protocol to the selected test protocols (test battery)
box.
Click the <<
Remove
removebutton to delete a high-
lighted protocol or procedure from the test battery.
Click the
Remove All
button to delete all of the pro-
tocols and procedures from the test battery.
Click the
Default Battery
button to use the ICS
default test battery.
Installation Note:
If your facility has a different protocol than what is set up in the default test battery, it is recommended that when you first
install the system, you set up a facility default operator test battery. Then add all other operators, and they will inherit the
default test battery. If desired, each operator’s test battery can be further customized.
C. Click
OK
and go to
12
Otometrics - ICS Chartr 200 VNG/ENG
2 Prepare System for Data Collection
