natus Dantec Keypoint Focus, Инструкции по эксплуатации оборудования

Страница: 20 / 44

Hardware Instructions for Use
20
Stimulation Indicator
The Stimulation indicator yellow light (LED) blinks once for Single Stimulation,
and intermittently for Repetitive Stimulation.
Single Stimulation Key
When the Single Stimulation key is pressed, a single stimulus is released, and
the indicator blinks once.
The Single Stimulation key can also be used to stop Repetitive Stimulation.
Repetitive Stimulation Key
When the Repetitive Stimulation key is pressed, repetitive stimulus is
released and the indicator blinks intermittently.
To stop repetitive stimulation, press either the same Repetitive Stimulation
key, or the Single Stimulation key.
Stimulation Intensity / Duration / Repetition Rate
Stimulation Intensity Control Knob
The Stimulation Intensity control knob allows you to adjust the intensity of
the stimulation released.
Rotate the control knob to the right to increase the stimulation intensity.
Rotate the control knob to the left to diminish the stimulation intensity.
Reset Stimulation Intensity Key
Press the Reset Stimulation Intensity key to reset the stimulation intensity to
its base level.
WARNING When operating the current stimulators be careful not to
expose the patient to high currents. Before connecting or disconnecting the
stimulation electrode, always reset the stimulator.