
3
Unpacking and Installing
Note
•
Make yourself familiar with the Otosuite Video Otoscopy Module, Aurical Otocam 300, and their functions and
settings, before you start using them with a client.
To install and get started with Otocam 300 and the Otosuite Video Otoscopy module, follow the sequence below:
Otosuite
•
Install Otosuite on the PC. For Otosuite installation instructions, see the Otosuite Installation Guide, on the Otosuite
installation medium.
Aurical Otocam 300
•
Unpack Aurical Otocam 300 (
).
•
Assemble Aurical Otocam 300 (
).
•
Connect Aurical Otocam 300 to the PC or to one of the USB connections on the rear of Aurical® Aud (
).
3.1
Unpacking
1. Unpack Aurical Otocam 300 carefully.
When you unpack Aurical Otocam 300 and accessories, it is a good idea to keep the packing material in which they
were delivered.If you need to send Aurical Otocam 300 in for service, the original packing material will protect against
damage during transport, etc.
2. Inspect the equipment for possible visual damage.
If damage has occurred, do not put the device into operation. Contact your local distributor for assistance.
3. Check the packing list accompanying the package to make sure that you have received all necessary parts and accessor-
ies. If your package is incomplete, contact your local distributor.
3.2
Storing
If you need to store Aurical Otocam 300 before you put it into operation, follow the guidelines below:
•
Store Aurical Otocam 300 and accessories in the boxes provided to protect the equipment from damage.
•
Store Aurical Otocam 300 and accessories in a dry environment.
3.3
Assembling Aurical Otocam 300
Only the cradle needs to be assembled. Use the supplied Allen key, screws and washer to assemble the cradle as shown.
8
Aurical Otocam 300
3 Unpacking and Installing