
3.4
Connecting Aurical Otocam 300
1. Connect the USB cable of Aurical Otocam 300 to one of the computer’s USB ports.
Aurical Otocam 300 is powered through the USB connection to the PC.
If you are using Aurical Otocam 300 in connection with Aurical® Aud, you can alternatively connect Aurical Otocam
300 to one of the USB connections on the rear of Aurical® Aud.
2. Launch Otosuite and select the Otosuite Video Otoscopy module.
Aurical Otocam 300 is automatically connected to the Otosuite Video Otoscopy module.
3.5
Switching Aurical Otocam 300 on and off
Switching on Aurical Otocam 300
1. Start up the computer.
2. Connect the USB cable of Aurical Otocam 300 to one of the computer’s USB ports.
3. Launch Otosuite and select the
Video Otoscopy
module.
Aurical Otocam 300
9
3 Unpacking and Installing