Page of 7
4
ASSEMBLY DIAGRAM
OPERATION
1.
Before the Solar Motion Light can operate to its full capacity, the Solar Panel needs to be in sunlight for 3 days
to fully charge the included battery. Charging should be done with the unit in the “OFF” position.
2.
Located at the bottom of the Battery Housing (11) there is a switch with three positions:
Turn the switch to “AUTO” position, the light will turn on automatically at night when motion is
detected by the Motion Detector Head (6).
Turn the switch to “ON” position, the light can be used as a standard light for constant illumination.
Turn the switch to “OFF” position, the light will remain off and will not detect any movement.
3.
The lamp heads and arms are adjustable:
Part
Description
Part
Description
1
Lamp
9
Power Socket
2
Solar Panel (16 ft. wire)
10
Solar Panel Mounting Bracket
3
Screws & Anchors
11
Battery Housing
4
120 LED’s
12
Coupling Shaft
5
Mounting Bracket
13
LUX Adjusting Knob
6
Motion Detector Head
14
SENS Adjusting Knob
7
Arm
15
TIME Adjusting Knob
8
ON/OFF/AUTO Switch
16
NI-MH Battery Pack (not shown)
