Page of 7
6
LUX (LIGHT LEVEL)
1.
The LUX Adjusting dial (13) tells the sensor the level of darkness that must be reached before the light turns
on.
2.
If set to the maximum
level, the light will go on in daylight.
3.
If set to the minimum setting
the sensor will only trigger the light to turn on at dusk or when it is dark
out. This is the ideal position for general usage.
TIME
1.
The TIME Adjusting dial (15) sets the duration of illumination time.
2.
The TIME is adjustable from 8 seconds to 2 minutes. Rotating the dial clockwise will increase the
illumination time.
SENS (SENSITIVITY)
This determines the range of motion detection:
1.
Mid position - Normal setting.
2.
Maximum position - Maximum range.
LOCATION OF SOLAR PANEL
For best results, please locate your solar panel in a
position where it can absorb direct sunlight on the solar
panel, and generally free from cover and shade.
TROUBLESHOOTING
If the Solar Motion Light does not illuminate when movement in front of the sensor is obvious, please observe
the following:
Ensure the solar panel is in a location where it will receive maximum sunlight during daytime hours.
Ensure the lamp head is away from other light sources. Other light sources at night will prevent the
unit from turning on.
Ensure switch is set to “AUTO” position.
Check batteries are installed correctly.
Allow the solar panel to charge the batteries in direct sunlight for 3 days with the switch in the
“OFF” position.
Replace Batteries.
Note:
Rechargeable batteries may last up to 600 charges. For best performance replace batteries every 12
months.
