Native TCT User Guide-v1.0
f.
One finger swipe down until last control to select then again swipe down then focus
overshot signal call.
g.
One Finger single/double tap on selected control then focused actor activated signal will
call.
h.
Two fingers drag on screen then action scroll signal will call.
i.
Deactivate the accessibility by run “sh-3.2# vconftool set -f -t bool
db/setting/accessibility/tts 0”
j.
After deactivate status changed signal will call.
k.
If the corresponding event signals mgs are changed then press Pass Otherwise, press Fail.
Figure 3-130: DALi Accessibility Manager
DALi Accessibility Manager Flick
To perform the test:
a.
Run tbtcoreapp
b.
Activate the accessibility by run “sh-3.2# vconftool set -f -t bool
db/setting/accessibility/tts 1” on target shell with root on mode
c.
One finger single tap on DALi Accessibility Manager Flick. Then focused this with
yellow box
d.
One finger double tap on DALi Accessibility Manager Flick.
e.
One finger flick up/down on screen to change the focus control then action next and
action previous signal will call.
f.
One finger flick right/left on screen to change the focus control then action read next and
action read previous signal will call.