NATIVE TCT Скачать руководство пользователя страница 120

Страница: 120 / 162

Native TCT User Guide-v1.0

A path will be shown where contact are save as vcard from connected device will be
shown.

Go to that path and pull the vcards file, and check contacts are same to the connected
device.

Press PASS if everything works fine as above otherwise FAIL.

Figure 3-168: PBAP All vcards

4.2.2.5

Bluetooth LE

This section describes the Bluetooth LE testing options. If the functionality works as

expected, press PASS, otherwise, press FAIL.

Gatt Client Test

To perform the test

Make sure Bluetooth is turned ON.

Run

Gatt Server

from TBT module list in another device.

Press

Discover

Button to Start discovering Gatt Server.

Select

Gatt server ID

from discovered list to connect it.

After successfully connected, two services

Link loss service

and

Battery service

will be shown.

select

Link loss

service, a characteristic will be shown

Select characteristic, then press Read button.

Get

value will be shown and

Read

request will be

shown in Gatt Server end.

Press

Write

button, value written to Gatt Server and it will be shown there.

aa.

Press

hardware back

button,

services

list will be shown again

bb.

Select

Battery

service, a characteristic will be shown

cc.

Select characteristic, then press

Read

button.

Get

value will be shown and

Read

request will be

shown in

Gatt Server

end.

dd.

Press Expand button,

Descriptor

list will be shown under battery characteristic.

ee.

Select descriptor then press Read button,

Get

value will be shown and

Read

request will be shown

Содержание TCT



































































































































































Результаты поиска

Содержание TCT

Отзывы:

NATIVE TCT, Руководство пользователя, Страница: 120 / 162

Результаты поиска

Содержание TCT

Отзывы: